Hand Fracture System Cadaveric Lab Part 1: System Overview and Design Rationale
Randy Bindra, MCh Orth, MS Orth, FRCS, is a fellowship-trained hand surgeon, board certified in orthopaedic surgery, and a designing surgeon of the Acumed Hand Fracture System. In this video, Professor Bindra provides an overview and some of the design rationale of the Hand Fracture System. Read More
Hand Fracture System Cadaveric Lab Part 2: Rolando Fracture Hook Plate
Professor Randy Bindra, MCh Orth, MS Orth, FRCS, demonstrates the approach and implantation of the Rolando Fracture Hook Plate, one of the specialty plates in the Acumed Hand Fracture System. The 1.3 mm Rolando Fracture Hook Plate is designed for a three-part fracture pattern at the base of the first metacarpal. Read More
Hand Fracture System Cadaveric Lab Part 3: Curved Medial Lateral Plate
Professor Randy Bindra, MCh Orth, MS Orth, FRCS, demonstrates the approach and implantation of the Curved Medial/Lateral Plate, one of the specialty plates in the Acumed Hand Fracture System. The Curved Medial/Lateral Plate is designed to address diaphyseal fractures and distal phalangeal fractures when a medial or lateral approach is preferred. Read More
Hand Fracture System Cadaveric Lab Part 4: Avulsion Hook Plate
This video demonstrates the approach and implantation of the Avulsion Hook Plate, one of the specialty plates in the Acumed Hand Fracture System. The 0.8 mm Avulsion Hook Plate is designed to provide more stability than a K-wire when a fragment is too small for a single lag screw. Read More
Ankle Plating System 3 Cadaveric Lab Part 1: Posteromedial Approach
Anish Kadakia, MD, is a board-certified orthopaedic surgeon and associate professor in the Department of Orthopaedic Surgery at Northwestern University. Dr. Kadakia is a co-designer of the Acumed Ankle Plating System 3, which features seven plate families to treat fractures of the distal fibula and tibia. Read More
Ankle Plating System 3 Cadaveric Lab Part 2: Posterolateral Approach
Anish Kadakia, MD, is a board-certified orthopaedic surgeon and associate professor in the Department of Orthopaedic Surgery at Northwestern University. Dr. Kadakia is a co-designer of the Acumed Ankle Plating System 3, which features seven plate families to treat fractures of the distal fibula and tibia. Read More
Ankle Plating System 3 Cadaveric Lab Part 3: Proximal Posterolateral Approach
Anish Kadakia, MD, is a board-certified orthopaedic surgeon and associate professor in the Department of Orthopaedic Surgery at Northwestern University. Dr. Kadakia is a co-designer of the Acumed Ankle Plating System 3, which features seven plate families to treat the distal fibula and tibia. Read More
Distal Radius Fractures – Dr. Ruch : Part 1 : Proper Plate Placement and Fracture Fixation
David S. Ruch, M.D., Chief of Orthopaedic Hand Service at Duke University Medical Center, talks about the anatomy of the distal radius and why it precludes universal plate placement.
Distal Radius Fractures – Dr. Ruch : Part 2 : Priorities for reduction – Identify
David S. Ruch, MD, Chief of Orthopaedic Hand Service at Duke University Medical Center, discusses the importance of proper plate placement for fracture reduction on distal radius fractures.
Distal Radius Fractures – Dr. Ruch : Part 4 : Priorities for reduction – Verify
David S. Ruch, MD, Chief of Orthopaedic Hand Service at Duke University Medical Center, discusses the variety of complications that can exist when handling intra-articular fractures of the distal radius, including problems with reduction and over-reduction.